DC EV Ultra-Fast Charger 

Q: What input capacity must my site provide for the 300 kW model?

490 A per phase at 400 V AC (3‑phase). Reserve at least 10 % margin, so size the feeder and breaker for ~540 A.

Q: Can CCS1 and CHAdeMO charge at the same time?

Yes. Power is dynamically split; e.g., 200 kW + 100 kW on the 300 kW cabinet, or any combination up to each connector’s current limit (CCS 200 A, CHAdeMO 150 A).

Q: How do we integrate with an existing OCPP network?

Ethernet is standard; 4G/LTE or Wi‑Fi can be ordered. Firmware supports OCPP 1.6 JSON

Q: What routine maintenance is required?

Quarterly air‑filter cleaning, annual RCBO trip‑test, and fan inspection. No coolant service except on liquid‑cooled cable models (glycol change every 3 years).

Q: Can we limit maximum site demand automatically?

Yes. Via OCPP “Smart Charging” profiles or the optional RS‑485/CT‑Clamp module for local demand‑control without backend.

Q: What is the enclosure rating and noise level?

Galvanised steel IP54, IK10, < 65 dB(A) at 1 m. Operating –20 °C – 55 °C, 5‑95 % RH.

Dual‑CCS2 ultra‑fast charger with dynamic load balancing, 7″ LCD, OCPP 1.6J backend, and IP54 steel enclosure—built for forecourts, fleets, and highway hubs.

80- 80 +

kW

A wide voltage band suits every traction battery, while liquid‑cooled leads unleash ultra‑fast charging at 350 kW +.

IP54 / IK10

Stainless‑steel cabinet—weather‑sealed & vandal‑resistant.

0 +

Years Experience

Powerful, Flexible, Future‑Proof

The Series Wallbox grows with your panel, your solar array, and your next EV.

Adjustable Current

Dial in 10 A, 13 A, 16 A, or 32 A to match any breaker.

Smart Scheduling

Auto‑start during off‑peak hours and track savings in real time.

Safety You Can See—and Trust

From built‑in PEN fault detection to encrypted firmware, every layer of the X‑Series Wallbox is engineered to protect your home, your car, and your data.

PEN Fault Protection

No earth rod needed—built‑in PEN detection slashes install time and cost.

Dual Residual Current Detection

AC 30 mA Type A + DC 6 mA sensors cut power in milliseconds.

LED Status Ring

360° colors show standby, charging, or fault—clearly visible day and night.

Secure Firmware

Signed OTA updates, encryption, and rolling security logs block tampering

Wi‑Fi & Ethernet on board, 4G optional

OCPP 1.6 JSON certified—ready for any backend

RFID tap‑to‑start + remote unlock via app

UK Smart Charge Point Regulations compliant, tamper alerts included

Always Online, Always Compliant

Specification

Product Specifications - XEVD-F Series

Technical Specification

European standard

Model	XEVD-F60-CM	XEVD-F80-CM	XEVD-F120-CM	XEVD-F160-CM	XEVD-F180-CM	XEVD-F200-CM	XEVD-F240-CM	XEVD-F300-CM
INPUT CHARACTERISTIC
Input voltage	260 - 480V AC
Input frequency	50/60Hz
Input Amps/per phase	93A AC	124A AC	186A AC	248A AC	279A AC	310A AC	372A AC	465A AC
Stand-by consumption	<30W
DC OUTPUT CHARACTERISTIC
Number of charging points	CCS2 + CCS2 ; CCS2 + CHAdeMO
Charging mode	Mode 4
Output voltage	150-1000V DC
Max. output power	60KW	80KW	120KW	160KW	180KW	200KW	240KW	300KW
Max output current	CCS2: 0-200A DC; CHAdeMO: 150A
Voltage accuracy	<0.5%
Current accuracy	<±1%
Ripple coefficient	RMS: ±0.5%;Peak:±1%
THD	≤5%@50% - 100% full load
Meeting accuracy	0.5
Efficiency	≥ 95.2% (Full load)
Cable Length	6m (Customized acceptable)
WORKING ENVIRONMENT
Protection degree	IP54
Environment temperature	-20 ~ 55 C
Cooling	forced air cooling
Relative humidity	5%-95% non-condensing
Altitude	2,000 m
Housing material	Galvanized sheet spraying
Noise emission	<65db
Storage temperature	-40 ~ 70 C
Mechanical impact resistance	IK10
STANDARD
Standard	ISO 15118,DIN EN 61851-1 DIN EN 61851-23 DIN IEC/TS 61439-7

Protection

Over voltage protection
Under voltage protection
Over load protection
Short circuit protection
Over-temp protection
Surge protection
TypeA RCBO

Function & Accessory

Display: TFT Color touch display 7"
LED indicator light
Emergency stop button
Ambient lighting

Authentication

RFID
QR code

Optional

PEN protection
integrated 4G,wifi
22kW AC Output characteristic

Connectivity

Connectivity
OCPP 1.6 JSON
Ethernet connection

Find the Perfect Charger for Your Business

Smart EV Wallbox

7/22kw

IP66/IK10

Portable AC Charger

7/11kW

IP65/IK10

DC EV Fast Charger

60-300kW

IP54/Ik10

Have Question?

Everything You Need to Know Here Today

What input capacity must my site provide for the 300 kW model?

490 A per phase at 400 V AC (3‑phase). Reserve at least 10 % margin, so size the feeder and breaker for ~540 A.

Can CCS1 and CHAdeMO charge at the same time?

Yes. Power is dynamically split; e.g., 200 kW + 100 kW on the 300 kW cabinet, or any combination up to each connector’s current limit (CCS 200 A, CHAdeMO 150 A).

How do we integrate with an existing OCPP network?

Ethernet is standard; 4G/LTE or Wi‑Fi can be ordered. Firmware supports OCPP 1.6 JSON

What routine maintenance is required?

Quarterly air‑filter cleaning, annual RCBO trip‑test, and fan inspection. No coolant service except on liquid‑cooled cable models (glycol change every 3 years).

Can we limit maximum site demand automatically?

Yes. Via OCPP “Smart Charging” profiles or the optional RS‑485/CT‑Clamp module for local demand‑control without backend.

What is the enclosure rating and noise level?

Galvanised steel IP54, IK10, < 65 dB(A) at 1 m. Operating –20 °C – 55 °C, 5‑95 % RH.

DC EV Ultra-Fast Charger

kW

IP54 / IK10